Düşük ışığı çalışmıyor

Took to auto electric they put on coder machine an reset all codes now all good

A refurbished BCM costs just over $1000 Australian dollars from a Victorian firm Precision Engine Components. Apparently they will refurbish, repair your faulty BCM, requiring sending your underdash fuse BCM unit away. Second hand appear to be around $300 - $400 Australian dollars from salvage yards. Another Victorian supplier Stedi can provide a 'specific' and I mean specific resistance Canbus cable conversion to trick the BCM into allowing LED bulbs to be recognized as similar resistance for the Ranger,Apparently, the years affected are Ranger PX1 2014 -15 and all Mazda BT 50's 2011 to present. Ranger 2011 -2013 and 2016 on are not affected, go figure? BCM was modified then changed again after 2015.

Same issue here passenger side low beam and fog lamp not working but high beam is. From Philippines any suggestions pls help thank you for answering

It is possible with a relay to use the working side low beam light to trigger the independently powered relay which then operates both low beam headlamps, if the BCM has a fault and cannot be reset.

Main beam not working. Prior to not working main beam flickered when used and then stayed on. Then just stopped. Have ECU refurbished. Checked fuses ?????

Low beams stop working after I fitted led. Switched back to normal bulbs still no low beams.